FafCarb CG cylinders are thin-bed, loose-fill filters. They provide optimum removal of moderate concentrations of molecular contamination from supply, recirculation, and exhaust air applications. FafCarb cylinders are noted for their extremely low leakage rates.
FafCarb CG cylindrical filters are engineered to provide the highest level of performance in Indoor Air Quality (IAQ), comfort and light-duty process applications. They utilize a high weight of adsorbent per unit airflow with only moderate pressure loss.
To handle various airflow ranges, CG (engineering grade plastic) cylinders are available in three sizes.
Both styles use a base plate holding frame for mounting. Each filter has three bayonet fittings on the end cap, and these locate in the base plate with a simple push-and-turn action similar to installing a light bulb. To ensure a leak-free seal between the cylinder and the base plate, each cylinder is fitted with a performance gasket.
The holding frames are modular and can be assembled to handle any airflow either in Cylinder housings or built up inside air handling units. The cylinders can be oriented for vertical or horizontal airflow.
FafCarb CG cylinders can be filled with a wide range of activated carbon or impregnated media to provide broad-spectrum or targeted adsorption of contaminants, including odors, irritants, and toxic and corrosive gases and vapors.
FafCarb CG
A cylindrical, corrosion-resistant molecular filter filled with activated alumina or activated carbon. They are the most versatile gas-phase air filter installed in supply, recirculation, and exhaust air systems in commercial, industrial, and process applications. The design provides the best total cost of ownership for the removal of corrosive, odorous, and irritant gases.
• Corrosion resistant and low dusting construction
• Inherently leak-free design when installed in dedicated hardware
• Combines highest removal efficiency and lowest pressure drop
• Typical target gases: hydrogen sulfide, VOC's, ozone, formaldehyde, nitrogen dioxide, and other acids and bases
versatile gas-phase air filter installed in supply, recirculation, and exhaust air systems in commercial, industrial, and process applications. The design provides the best total cost of ownership for the removal of corrosive, odorous, and irritant gases.
• Corrosion resistant and low dusting construction
• Inherently leak-free design when installed in dedicated hardware
• Combines highest removal efficiency and lowest pressure drop
• Typical target gases: hydrogen sulfide, VOC's, ozone, formaldehyde, nitrogen dioxide, and other acids and bases